Compression Tools

HP-510 Hand Pump - Oil Capacity 20 cu/in, Length 21"

198 N. Brandon Dr, Glendale Heights, IL , USA, 60139-2025

http://www.huskietools.com/index.cfm

The HP-510 hand pump is adjustable between 4,000 and 10,000 psi. It has a built-in 3/8" female, screw type coupler that will accept most 10,000 psi tools on the market today. Our Huskie pump features a two-stage rapid advance system with our patented repl ...

Submit review Recommend Visit Report Map

HP-510 Hand Pump - Oil Capacity 20 cu/in, Length 21"

198 N. Brandon Dr, Glendale Heights, IL , USA, 60139-2025

http://www.huskietools.com/index.cfm

The HP-510 hand pump is adjustable between 4,000 and 10,000 psi. It has a built-in 3/8" female, screw type coupler that will accept most 10,000 psi tools on the market today. Our Huskie pump features a two-stage rapid advance system with our patented repl ...

Submit review Recommend Visit Report Map

SP-85 - Hydraulic Operated Remote Cutting Head, NO CASE

198 N. Brandon Dr, Glendale Heights, IL, USA, 60139-2025

http://www.huskietools.com/index.cfm

This remote head unit connect to any 10,000 psi, high pressure, hydraulic pumping system. The Huskie remote cutters have a hinged head which can be opened for easy cable or bar insertion. The movable blade advances in a shear fashion, to cut the material ...

Submit review Recommend Visit Report Map

SP-40 - Hydraulic Operated Remote Cutting Head, NO CASE

198 N. Brandon Dr., Glendale Heights, IL , USA, 60139-2025

http://www.huskietools.com/index.cfm

This remote head unit connect to any 10,000 psi, high pressure, hydraulic pumping system. The Huskie remote cutters have a hinged head which can be opened for easy cable or bar insertion. The movable blade advances in a shear fashion, to cut the material ...

Submit review Recommend Visit Report Map

SP-40 - Hydraulic Operated Remote Cutting Head, NO CASE

198 N. Brandon Dr, Glendale Heights, IL, USA, 60139-2025

http://www.huskietools.com/index.cfm

This remote head unit connect to any 10,000 psi, high pressure, hydraulic pumping system. The Huskie remote cutters have a hinged head which can be opened for easy cable or bar insertion. The movable blade advances in a shear fashion, to cut the material ...

Submit review Recommend Visit Report Map

SP-32 - Hydraulic Operated Remote Cutting Head, NO CASE

198 N. Brandon Dr, Glendale Heights, IL, USA, 60139-2025

http://www.huskietools.com/index.cfm

This remote head unit connect to any 10,000 psi, high pressure, hydraulic pumping system. The Huskie remote cutters have a hinged head which can be opened for easy cable or bar insertion. The movable blade advances in a shear fashion, to cut the material ...

Submit review Recommend Visit Report Map

S-850 - Hand-Held Hydraulic Cutters, NO CASE

198 N. Brandon Dr., Glendale Heights, IL, USA, 60139-2025

http://www.huskietools.com/index.cfm

Huskie’s S-Series tools cut anything from *guy wire to anchor rod and most overhead and underground cables. The S-series cutters are portable, lightweight, and made to last years under the toughest field conditions. The tools are made of high grade stee ...

Submit review Recommend Visit Report Map

S-55 - Hand-Held Hydraulic Cutters, NO CASE

198 N. Brandon Dr., Glendale Heights, IL, USA, 60139-2025

http://www.huskietools.com/index.cfm

Huskie’s S-Series tools cut anything from *guy wire to anchor rod and most overhead and underground cables. The S-series cutters are portable, lightweight, and made to last years under the toughest field conditions. The tools are made of high grade stee ...

Submit review Recommend Visit Report Map

S-32CC - Hand-Held Hydraulic Cutters, NO CASE

198 N. Brandon Dr, Glendale Heights, IL, USA, 60139-2025

http://www.huskietools.com/index.cfm

Huskie’s S-Series tools cut anything from *guy wire to anchor rod and most overhead and underground cables. The S-series cutters are portable, lightweight, and made to last years under the toughest field conditions. The tools are made of high grade stee ...

Submit review Recommend Visit Report Map

S-24CC - Hand-Held Hydraulic Cutters, NO CASE

198 N. Brandon Dr, Glendale Heights, IL , USA, 60139-2025

http://www.huskietools.com/index.cfm

Huskie’s S-Series tools cut anything from *guy wire to anchor rod and most overhead and underground cables. The S-series cutters are portable, lightweight, and made to last years under the toughest field conditions. The tools are made of high grade stee ...

Submit review Recommend Visit Report Map

DA-12 - hydraulic Low Pressure 4" Cable Cutter, NO CASE

198 N. Brandon Dr., Glendale Heights, IL, USA, 60139-2025

http://www.huskietools.com/index.cfm

The four inch jaws slice through lead, copper and aluminum cables cleanly and without jamming because of the double acting system. The DA-12 is portable, with non-slip, knurled handles and a safety ring. It has a positive open and close position and a spe ...

Submit review Recommend Visit Report Map

2 Ton Battery Powered Hydraulic Crimper w/CASE - 6 Volt

198 N. Brandon Dr, Glendale Heights, IL, USA, 60139-2025

http://www.huskietools.com/index.cfm

The Huskie ROBO*REC-14PMT battery powered tool was designed to crimp connectors from 22 to 6 AWG and many coaxial connectors. This tool will accept most name brand dies used in ratcheting hand tools, including AMP, AT & T, Paladin, T& B and Crimpex. This ...

Submit review Recommend Visit Report Map

6 Ton Battery Powered Compression Tool w/CASE - .95" Ja...

198 N. Brandon Dr., Glendale Heights, IL , USA, 60139-2025

http://www.huskietools.com/index.cfm

The Huskie REC-CN58 is an open jaw version of the REC-58U latched type tool. The open jaw can easily fit into tight situations where the closing of a jaw latch would be a problem. The jaw is covered with a rubber boot designed to provide some insulated pr ...

Submit review Recommend Visit Report Map

6 Ton Battery Powered Compression Tool w/CASE - .95" Ja...

198 N. Brandon Dr, Glendale Heights, IL, USA, 60139-2025

http://www.huskietools.com/index.cfm

The Huskie REC-CN58 is an open jaw version of the REC-58U latched type tool. The open jaw can easily fit into tight situations where the closing of a jaw latch would be a problem. The jaw is covered with a rubber boot designed to provide some insulated pr ...

Submit review Recommend Visit Report Map

6 Ton Battery Powered Compression Tool w/CASE - .95" Ja...

198 N. Brandon Dr., Glendale Heights, IL , USA, 60139-2025

http://www.huskietools.com/index.cfm

The Huskie REC-CN558 is an open jaw version of the REC-558U latched type tool. The open jaw can easily fit into tight situations where the closing of a jaw latch would be a problem. The jaw is covered with a rubber boot designed to provide some insulated ...

Submit review Recommend Visit Report Map

6.2 Ton Battery Powered Flip-Top Dieless Crimping Tool ...

198 N. Brandon Dr, Glendale Heights, IL, USA, 60139-2025

http://www.huskietools.com/index.cfm

The REC-750 is a flip-top, dieless tool used to crimp cables up to 750 mCM. The flip top latch opens to allow for easy cable positioning and removal. The dieless system is used for non-tension splices and terminations. There is one stationary and three mo ...

Submit review Recommend Visit Report Map

12 Ton Battery Powered Compression Tool w/CASE - 1.5" J...

198 N. Brandon Dr, Glendale Heights, IL, USA, 60139-2025

http://www.huskietools.com/index.cfm

The REC-510K battery powered compression tool is designed to except Kearny WH-2, PH-2, and WH-3 style dies. Weighing just 15 pounds it was specifically designed for use in single-handed operation in overhead applications such as cable tray. It also elimin ...

Submit review Recommend Visit Report Map

12 Ton Battery Powered Compression Tool w/ CASE - 1" Ja...

198 N. Brandon Dr., Glendale Heights, IL, USA, 60139-2025

http://www.huskietools.com/index.cfm

The REC-410U and 12 ton compression tools were designed to accommodate all 12 ton "U" type dies widely used throughout the electrical industry.

A built-in by-pass cartridge assures a complete compression every time. The C-head rotates 180 degre ...

Submit review Recommend Visit Report Map

12 Ton Battery Powered Compression Tool NO CASE - 1" Ja...

198 N. Brandon Dr, Glendale Heights, IL, USA, 60139-2025

http://www.huskietools.com/index.cfm

The REC-410U and 12 ton compression tools were designed to accommodate all 12 ton "U" type dies widely used throughout the electrical industry.

A built-in by-pass cartridge assures a complete compression every time. The C-head rotates 180 degre ...

Submit review Recommend Visit Report Map

6 Ton Battery Powered Compression Tool w/CASE - 1.4" Ja...

198 N. Brandon Dr, Glendale Heights, IL, USA, 60139-2025

http://www.huskietools.com/index.cfm

The battery driven open jaw “ND” style compression tool has a powerful 6 ton output which will crimp the full range of W-type connectors. The snub-nose single groove jaw has a D3 nest die and will accept all “W” & “X” type dies (except the NDK ...

Submit review Recommend Visit Report Map

6.2 Ton Battery Powered Dieless Crimping Tool w/ CASE -...

198 N. Brandon Dr, Glendale Heights, IL, USA, 60139-2025

http://www.huskietools.com/index.cfm

The ECO-630 is a battery operated, dieless compression tool used to compress Anderson style lugs or other brand connectors manufactured to ANSI specifications C119.4. Advance and retract buttons on the tool handle allow for one hand operation, freeing the ...